Tektronix AD007 Manuel d'utilisateur télécharger pdf (Page 25)

Getting Started

AD007 User Manual

To contact your network administrator or network services, do these

steps:

1. Find the Ethernet hardware address on the back of the AD007

adapter (Figure 5) and copy it onto the card. Each AD007 adapter

has a unique Ethernet hardware addre ss.

Ethernet hardware address

Figure 5: Ethernet hardware address

2. Give both copies of the card to the network administrator who

will assign an IP Address and fil l out any other necessary

information.

3. For ease of setup, request that the Network Administrator assign a

static IP address. The Ethernet hardware address should be

mapped to this static IP address. If there is a DHCP/BOOTP

server, it should serve the same (static) IP address each time it is

requested.

4. If for some reason you cannot ge t a static IP address assigned, use

a dynamic IP address that is allocated by the DHCP/BOOTP

server. However, note that additional setup time is required if the

server allocates a different IP address to the a dapte r and you do

not have DNS.

The network administrator should retain one copy of the card and the

user should retain the other.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 87 88

Pas de commentaire

Tektronix AD007 Manuel d'utilisateur Page 25