Tektronix K1297-G20 Manuel d'utilisateur télécharger pdf (Page 27)

Getting Started

K1297-G20 Monitor User Manual

The following interfaces are located on the cover of the PC module in

slot 1:

H Socket for external PS/2 keyboard (KBD)

H Serial interface (COM1)

H Parallel interface (LPT1)

H 10Base-2 and 10Base-T sockets for LAN connection

H Socket for external monitor (VGA)

For further information on the individual interfaces, please refer to

Appendix A: Interfaces.

To reset the Protocol Tester in an emergency, use a pointed tool and insert

it into the RESET switch located on the cover of the PC module. There is

also an LED indicating the operating state of the hard disk (HD).

Slots 2 to 5 are available for the measuring modules. For further

information on the individual measuring boards, please refer to

Appendix A: Interfaces.

NOTE. You will find information on pin assignment of the individual

sockets also in Appendix A.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 197 198

Pas de commentaire

Tektronix K1297-G20 Manuel d'utilisateur Page 27