Tektronix Phaser 600 Manuel d'utilisateur télécharger pdf (Page 565)

OCCASIONAL CLEANING

3 If you are using a dry cloth, moisten it with 90% pure isopropyl alcohol.

4 Pull forward on the back tension blade’s

handle and hold it in that position; this

lifts the blade away from the drum.

5 Use your ﬁngers to hold the cloth

against the tool. Position the tool under

the blade; it notches onto the blade to

serve as a guide, cleaning the front and

back of the blade at the same time.

6 Clean one section of the blade by wiping

back and forth 3-4 times with pressure.

7 Switch hands to clean the other end of

If the blade is especially dirty, you may need to add more alcohol to the lint-free cloth

or use a new cloth.

Pas de commentaire

Tektronix Phaser 600 Manuel d'utilisateur Page 565