Tektronix AFG3000 Manuel d'utilisateur télécharger pdf (Page 45)

Reference

AFG3000 Series Arbitrary/Function Generators Reference Manual 2-5

Arb Menu

The arbitrary/function generator can output a user-defined waveform that is stored

in the internal memory, Edit Memory, or a USB memory. Table 2-4 shows the Arb

menu.

To output a user-defined waveform, you have two options:

 Output the contents of Edit Memory

 Output one of user-defined waveforms stored in the internal or in a USB

memory

To output a user-defined waveform, you must first save the file in the internal or

USB memory. You can save up to four user-defined waveforms in the internal

waveform memory. Waveform data in the Edit Memory can also be output, but the

contents of Edit Memory is deleted when the instrument power is turned off.

Table 2-4: Arb Menu

First Level Second Level Description

Arb Waveform Menu Memory

Internal

USB

Selects a memory type. (Internal or USB)

Refer to page 2-28 for file operations.

(blank)

Change Directory Opens a directory in a USB memory.

Cancel

Frequency/Period/

Phase Menu

Refer to Table 2-1

Amplitude/Level Menu Refer to Table 2-1

Run Mode Menu Continuous –––

Modulation Refer to Table 2-6

Sweep Refer to Table 2-7

Burst Refer to Table 2-8

Output Menu Refer to Table 2-9

NOTE. When the arbitrary/function generator outputs an Arb waveform, the

peak-to-peak voltage of the measurement result is the same as the setup value if the

waveform data is normalized.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 229 230

Pas de commentaire

Tektronix AFG3000 Manuel d'utilisateur Page 45