Tektronix P H A S E R Phaser 840 Manuel d'utilisateur télécharger pdf (Page 25)

Setup Guide

Chapter

EtherTalk, LocalTalk,

and TokenTalk

Configuration

Conﬁguration overview

The printer’s AppleTalk connection works with Macintosh system software 7.0,

7.1, 7.5, 7.6, 8.0, 8.1, and 8.2.

The conﬁguration procedure for LocalTalk, EtherTalk, and TokenTalk consists of

two simple steps:

Print the Conﬁguration Page. It reports the printer’s default name,

which you need for EtherTalk and TokenTalk conﬁgurations. For

information on printing a Conﬁguration Page, see “Printing a

Conﬁguration Page” on page 2.

Verify that the printer is in the Chooser. See “Finding the printer’s

name in the Chooser” on page 20.

■ If the printer is not in the Chooser, see the PhaserShare Networking

Manual on the printer’s CD-ROM.

■ If the printer is in the Chooser, you may want to change the

printer’s name or zone. For information on these procedures, see

the PhaserShare Networking Manual on the printer’s CD-ROM.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Pas de commentaire

Tektronix P H A S E R Phaser 840 Manuel d'utilisateur Page 25