Tektronix DPO4000 Manuel d'utilisateur Page 167
- Page / 585
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Commands Listed in Alphabetical Order
ROM runs just th
e IO board diagnostic group.
ACQ runs just the acquisition system diagnostic group.
DIAg:SELect:<function> (No Query Form)
Runs self-tests on the specified system subsystem.
Group
Calibration and Diagnostic
Syntax
DIAg:SELect:<function>
Arguments
<function> specifies a single oscilloscope subsystem on which to run self tests
(diagnostics). Valid values are:
ACQ tests the acquisition system.
APPKey tests the application keys.
CPU tests the CPU.
DISplay tests the display.
FPAnel tests the front panel controls.
IO tests the IO ports.
ROM tests the system read only memory.
Examples
DIAG:SELECT:CPU sets the oscilloscope to run just CPU tests.
DIAg:STATE (No Query Form)
This command starts or stops the oscilloscope self-test. Depending on the
argument, self-test capabilities are either turned on or off.
Group
Calibration and Diagnostic
Syntax
DIAg:STATE {EXECute|ABORt}
Arguments
EXECute starts diagnostics.
ABORt stops diagnostics at the end of the current loop.
MSO4000 and DPO4000 Series Programmer Manual 2-157
- MSO4000 and DPO4000 Series 1
- Programmer Manual 1
- Contacting 4
- Tektronix 4
- Table of Contents 5
- Getting Started 7
- Documentation 10
- Command Syntax 11
- Commands 12
- Clearing the oscilloscope 13
- Command Entry 13
- Abbreviating 14
- Concatenating 14
- Constructed Mnemonics 15
- Argument Types 17
- Command Groups 21
- Alias Command 22
- Bus Command Gr 23
- Table2-15:BusCommands(cont.) 24
- Calibration a 27
- Cursor Command Group 27
- Display Command Group 29
- Ethernet Command Group 30
- File System Command Group 31
- Hard Copy Command Group 32
- Horizontal Co 34
- Mark Command Group 34
- Math Command G 36
- Measurement Command Group 37
- Miscellaneous Command Group 40
- PictBridge Co 42
- Power Command Group 42
- Save and Recall Command Group 50
- Search Command Group 51
- Search Commands (cont.) 52
- Trigger Command G roup 58
- Vertical Command Group 68
- Data Formats 72
- Transferring Waveform 74
- Data from the Oscilloscope 74
- Data to the Oscilloscope 74
- Zoom Command G 77
- ACQuire? (Query Only) 79
- ACQuire:MAGnivu 79
- ACQuire:MAXS 80
- ACQuire:MODe 80
- ACQuire:NUMACq? (Query Only) 81
- ACQuire:NUMAVg 81
- ACQuire:STATE 82
- ACQuire:STOPAfter 83
- ALIas:CATalog? (Query Only) 84
- ALIas:DEFine 84
- ALIas:DELEte (No Query Form) 85
- ALIas[:STATE] 86
- ALLEv? (Query Only) 87
- AUTOSet (No Query Form) 87
- AUTOSet:ENAble 88
- AUXin? (Query Only) 88
- AUXin:PRObe 88
- AUXin:PRObe: 90
- DEGAUss (No Query Form) 90
- AUXin:PRObe:FORCEDRange 90
- AUXin:PRObe:GAIN 91
- AUXin:PRObe:SIGnal 92
- BUS:B<x>AU Dio:TYPe TDM 93
- BUS:B<x>AUDio :TYPe TDM 94
- BUS:B<1-4>:A 96
- UDio:DATa:POLarity 96
- BUS:B<1-4>:AUDio:TYPe 99
- BUS:B<x>:CAN:BITRate 101
- BUS:B<x>:CAN 102
- BUS:B<x>:CAN:SOUrce 102
- BUS:B<x>:DISplay:FORMAt 103
- BUS:B<x>:DISplay:TYPe 103
- BUS:B<x>:FLEXray:SOUrce 105
- BUS:B<x>:FLEXray:SIGnal 105
- BUS:B<x>:LABel 107
- BUS:B<x>:LIN:BITRate 107
- BUS:B<x>:LIN:IDFORmat 108
- BUS:B<x>:LIN:POLARity 108
- BUS:B<x>:LIN:SOUrce 109
- BUS:B<x>:LIN 110
- :STANDard 110
- BUS:B<x> 110
- :PARallel:CLOCK:EDGE 110
- BUS:B<x>:PARallel:WIDth 111
- BUS:B<x>:POSition 112
- BUS:B<x>:RS232C:BITRate 112
- BUS:B<x>:RS2 113
- 32C:DATABits 113
- BUS:B<x>:RS232C:PARity 114
- BUS:B<x>:SPI:BITOrder 115
- BUS:B<x>:SPI:DATA:SIZe 118
- BUS:B<x>:SPI 119
- :FRAMING 119
- BUS:B<x>:SPI:IDLETime 119
- BUS:B<x>:STATE 120
- BUS:B<x>:TYP 121
- BUS:THReshol 122
- BUS:THReshold:D<x> 122
- BUS:UPPerthr 123
- BUSY? (Query Only) 123
- *CAL? (Query Only) 124
- CH<x>? (Query Only) 127
- CH<x>:AMPSVI 128
- AVOLTs:ENAble 128
- CH<x>:BANdwidth 128
- CH<x>:COUPling 129
- CH<x>:DESKew 130
- CH<x>:INVert 130
- CH<x>:LABel 131
- CH<x>:OFFSet 131
- CH<x>:POSition 132
- CH<x>:PRObe:FORCEDRange 135
- CH<x>:PRObe:GAIN 135
- CH<x>:PRObe: 137
- ID:TYPE? (Query Only) 137
- CH<x>:PRObe:MODel 137
- CH<x>:PRObe:PROPDELay 137
- CH<x>:PRObe:SIGnal 138
- CH<x>:SCAle 139
- CH<x>:TERmination 140
- CH<x>:YUNits 141
- CLEARMenu (No Query Form) 141
- *CLS (No Query Form) 141
- CURSor:DDT? (Query Only) 142
- CURSor:FUNCt 143
- CURSor:HBArs? (Query Only) 143
- CURSor:HBArs:UNIts 144
- CURSor:MODe 145
- CURSor:VBArs? (Query Only) 146
- CURSor:VBArs 147
- :DELTa? (Query Only) 147
- :POSITION<x> 148
- CURSor:VBArs:UNIts 148
- CURSor:XY:POLar:THETA:DELt a? 151
- CURSor:XY:POLar:THETA:UNIt s? 151
- CURSor:XY:PRODUCT:DELta? 151
- CURSor:XY:PR 152
- CURSor:XY:RA 153
- TIO:UNIts? (Query Only) 153
- CURSor:XY:READOUT 153
- CURSor:XY:RE 155
- Examples 156
- DATa:DESTination 157
- DATa:ENCdg 157
- Related Commands 158
- Arguments 158
- DATa:SOUrce 159
- DATa:STARt 160
- DATa:STOP 160
- DESkew (No Query Form) 163
- DESkew:DISPl 164
- DIAg:LOOP:OPTion 164
- DIAg:LOOP:OPTion:NTIMes 164
- DIAg:RESUlt:LOG? (Query Only) 166
- DIAg:SELect (No Query Form) 166
- DIAg:STATE (No Query Form) 167
- DISplay? (Query Only) 168
- DISplay:CLOCk 168
- DISplay:DIGital:HEIght 168
- DISplay:FORMat 169
- DISplay:GRAticule 169
- DISplay:INTENSITy:BACKLight 170
- DISplay:INTENSITy:GRAticule 170
- DISplay:INTENSITy:WAVEform 171
- DISplay:PERSistence 171
- DISplay:STYle:DOTsonly 172
- D<x> 172
- D<x>:LABel 173
- D<x>:POSition 173
- D<x>:THREshold 174
- *ESR? (Qu 175
- ETHERnet:DHCPbootp 175
- ETHERnet:DNS:IPADDress 176
- ETHERnet:DOMAINname 176
- ETHERnet:ENE 177
- T:ADDress? (Query Only) 177
- ETHERnet:GATEWay:IPADDress 177
- ETHERnet:HTTPPort 177
- ETHERnet:IPADDress 178
- ETHERnet:NAME 178
- ETHERnet:PAS 179
- ETHERnet:SUBNETMask 180
- EVENT? (Query Only) 180
- EVMsg? (Query 181
- EVQty? (Query Only) 181
- FACtory (No Qu 182
- FILESystem? ( 183
- Query Only) 183
- FILESystem:CWD 183
- FILESystem:DIR? (Query Only) 184
- FPAnel:PRESS (No Query Form) 188
- FPAnel:TURN (No Query Form) 190
- GPIBUsb:ADDress? (Query Only) 191
- GPIBUsb:ID? (Query Only) 191
- HARDCopy (No Query Form) 191
- HARDCopy:ACTIVeprinter 192
- HARDCopy:INKSaver 192
- HARDCopy:LAYout 193
- HARDCopy:PRE 194
- VIEW (No Query Form) 194
- HARDCopy:PRI 195
- NTer:LIST? (Query Only) 195
- HARDCopy:PRINTer:RENam 195
- HORizontal? (Query Only) 196
- HORizontal:DELay:MODe 196
- HORizontal:DELay:TIMe 197
- HORizontal:RECOrdlength 199
- HORizontal:SAMPLERate 200
- HORizontal:SCAle 200
- ID? (Query Onl 201
- *IDN? (Query Only) 201
- LANGuage 201
- *LRN? (Query Only) 202
- MARK:CREATE (No Quer 204
- MARK:DELEte (No Query Form) 204
- MARK:FREE? (Query Only) 205
- MARK:SELecte 206
- MARK:TOTal? (Query Only) 207
- {MATH 207
- MATH[1]? (Query Only) 207
- MATH[1]:DEFine 208
- MATH[1]:HORizontal:POSition 209
- MATH[1]:HORizontal:SCAle 210
- MATH[1]:HORizontal:UNIts 210
- MATH[1]:SPECTral:MAG 211
- MATH[1]:SPECTral:WINdow 211
- MATH[1]:TYPe 212
- MATH[1]:VERTical:POSition 212
- MATH[1]:VERTical:SCAle 213
- MATH[1]:VERTical:UNIts 213
- MATHVAR? (Query Only) 214
- MATHVAR:VAR<x> 214
- MEASUrement? (Query Only) 215
- MEASUrement: 216
- CLEARSNapshot (No Query Form) 216
- MEASUrement:GATing 216
- MEASUrement:IMMed:SOUrce[1] 218
- MEASUrement:IMMed:SOUrce2 219
- MEASUrement:IMMed:TYPe 220
- IMMed:VALue? (Query Only) 224
- INDICators:STATE 226
- MEAS<x>? (Query Only) 227
- MEAS<x>:DELay:DIRection 228
- MEASUrement:MEAS<x> 229
- :MEAN? (Query Only) 229
- :SOURCE2 230
- MEAS<x>:STATE 232
- MEASUrement:METHod 236
- REFLevel:ABSolute:MID[1] 239
- MEASUrement:REFLevel:METHod 240
- REFLevel:PERCent:LOW 242
- REFLevel:PERCent:MID<x> 244
- MEASUrement:STATIstics:MODE 244
- MESSage:BOX 246
- MESSage:CLEAR (No Query Form) 247
- MESSage:SHOW 247
- MESSage:STATE 250
- NEWpass(NoQueryForm) 250
- <QString> is th 251
- PASSWord(No Query Form) 252
- PICTBridge:DATEPrint 252
- PICTBridge:IDPrint 253
- PICTBridge:I 254
- MAGESize 254
- PICTBridge:P 255
- APERSize 255
- PICTBridge:PAPERType 256
- RINTQual 257
- POWer:CURRENTSOurce 257
- POWer:DISpla 258
- POWer:GATESOurce 258
- POWer:GATing 259
- POWer:HARMonics:DISPlay:TYPe 260
- POWer:HARMonics:FREQRef 260
- POWer:HARMon 262
- POWer:HARMonics:IEC:FILter 262
- POWer:HARMonics:IEC:GROUPing 263
- POWer:HARMonics:IEC:OBSPERiod 265
- POWer:HARMonics:NR_HARMonics 268
- POWer:HARMo 276
- POWer:HA 277
- RMonics:SOURce 277
- POWer:HARMonics:STANDard 278
- POWer:INDICators 278
- POWer:MODulation:SOUrce 279
- POWer:MODula 280
- POWer:QUALit 281
- POWer:QUALity:DISplay:APPpwr 281
- POWer:QUALity:DISplay:IRMS 282
- POWer:QUALi 286
- POWer:QUALity:FREQREFerence 286
- POWer:QUAL 287
- POWer:REFLevel:ABSolute:HIGH 290
- POWer:REFLevel:ABSolute:LOW 290
- POWer:REFLevel:HYSTeresis 291
- POWer:REFLevel:METHod 292
- POWer:REFLev 293
- POWer:REFLevel:PERCent:HIGH 293
- POWer:REFLevel:PERCent:LOW 293
- POWer:RIPPle (No Query Form) 294
- POWer:RIPPle 296
- :RESults:MEAN? (Query Only) 296
- POWer:RIPPl 297
- POWer:SOA:LINear:XMAX 297
- POWer:SOA:LINear:XMIN 298
- POWer:SOA:LINear:YMAX 298
- POWer:SOA:LINear:YMIN 299
- POWer:SOA:LOG:XMAX 299
- POWer:SOA:LOG:XMIN 300
- POWer:SOA:LOG:YMAX 300
- POWer:SOA:LOG:YMIN 301
- POWer:SOA:MASK:DEFine 301
- POWer:SOA:MASK:MAXAmps 302
- POWer:SOA:MASK:MAXVolts 302
- POWer:SOA:MASK:MAXWatts 303
- POWer:SOA:MA 304
- SK:STATe 304
- POWer:SOA:MASK:STOPOnviol 304
- POWer:SOA:PLOTTYPe 305
- POWer:SOA:RE 306
- Sult:NUMACq? (Query Only) 306
- POWer:STATIstics:MODE 307
- POWer:STATIstics:WEIghting 307
- POWer:SWLoss:CONDCALCmethod 308
- POWer:SWLoss 310
- POWer:SWLos 311
- POWer:SWLoss:GATe:POLarity 311
- POWer:SWLoss:GATe:TURNON 312
- POWer:SWLoss:RDSon 313
- :TOFF:POWER:MAX? (Query Only) 318
- :TON:POWER:MIN? (Query Only) 321
- POWer:SWLoss:VCEsat 323
- POWer:TYPe 324
- POWer:VOLTAGESOurce 325
- *RCL (No Query 327
- RECAll:SETUp (No Query Form) 327
- REF<x>? (Query Only) 328
- REF<x>:DATE? 329
- (Query Only) 329
- REF<x>:HORizontal:SCAle 329
- REF<x>:LABel 330
- REF<x>:VERTical:SCAle 331
- REM (No Query Form) 332
- *RST (No Query Form) 332
- *SAV (No Q uery Form) 333
- SAVe:ASSIgn:TYPe 333
- SAVe:IMAGe (No Query Form) 334
- SAVe:IMAGe:FILEFormat 335
- SAVe:IMAGe:INKSaver 335
- SAVe:IMAGe:L 336
- SAVe:SETUp (No Query Form) 336
- SAVe:WAVEfor 337
- SAVe:WAVEform:FILEFormat 338
- SAVe:WAVEform:GATIng 338
- SEARCH? (Query Only) 339
- SEARCH:SEARC 341
- H<x>:STATE 341
- for the AUDIO bus 343
- B<x>:FLEXray:FRAMEType 357
- LOCk:EDGE 385
- SEARCH:SEARCH<x> 386
- SEARCH:SEARCH<x>: 388
- TRIGger:A:SETHold:SETTime 388
- SELect:BUS<x> 393
- SELect:CH<x> 394
- SELect:CONTROl 394
- SELect:D<x> 395
- SELect:MATH[ 396
- SELect:REF<x> 396
- SET? (Query Only) 397
- SETUP<x>:LABEL 398
- SETUP<x>:TIM 399
- E? (Query Only) 399
- *STB? (Query Only) 399
- TEKSecure (No Query Form) 400
- TOTaluptime? 402
- *TRG (No Query Form) 402
- TRIGger (No Query Form) 402
- TRIGger:A 403
- TRIGger:A:BUS 404
- TRIGger:A:BU 406
- TRIGger:A:B 413
- TRIGger:A: 416
- S:B<x>:LIN:DATa:VALue 429
- S:B<x>:SPI:CONDition 433
- TRIGger:A:BUS:SOUrce 434
- TRIGger:A:EDGE? (Query Only) 435
- TRIGger:A:EDGE:COUPling 435
- TRIGger:A:EDGE:SLOpe 436
- TRIGger:A:EDGE:SOUrce 436
- TRIGger:A:HOLDoff:TIMe 437
- TRIGger:A:LEVel 438
- TRIGger:A:LEVel:AUXin 438
- TRIGger:A:LEVel:CH<x> 439
- TRIGger:A:LEVel:D<x> 439
- TRIGger:A:LOGIc? (Query Only) 440
- TRIGger:A:LOGIc:CLAss 440
- TRIGger:A:LOGIc:FUNCtion 441
- TRIGger:A:LO 442
- GIc:INPut? (Query Only) 442
- GIc:PATtern? (Query Only) 444
- TRIGger:A:LOGIc:PATtern:WHEn 445
- GIc:PATtern:WHEn:LESSLimit 446
- GIc:THReshold:CH<x> 447
- Werthreshold:CH<x> 448
- TRIGger:A:MODe 449
- TRIGger:A:PU 450
- Lse? (Query Only) 450
- TRIGger:A:PULse:CLAss 450
- LSEWIDth? (Query Only) 451
- TRIGger:A:PULSEWidth:POLarity 451
- TRIGger:A:PULSEWidth:SOUrce 451
- TRIGger:A:PULSEWidth:WHEn 452
- LSEWidth:WIDth 453
- TRIGger:A:RUNT? (Query Only) 453
- TRIGger:A:RUNT:POLarity 453
- TRIGger:A:RUNT:SOUrce 454
- TRIGger:A:RUNT:WHEn 454
- TRIGger:A:RUNT:WIDth 455
- TRIGger:A:SE 456
- THold? (Query Only) 456
- TRIGger:A:SETHold:CLOCk:EDGE 456
- TRIGger:A:SETHold:DATa? 458
- TRIGger:A:SETHold:DATa:SOUrce 458
- TRIGger:A:S 460
- ETHold:HOLDTime 460
- THold:THReshold:CH<x> 461
- TRIGger:A{:T 463
- RANsition 463
- RANsition 464
- TRIGger:A:TYPe 464
- TRIGger:A:VI 466
- Deo? (Query Only) 466
- Deo:CUSTom:LINEPeriod 467
- TRIGger:A:VIDeo:CUSTom:SCAN 467
- TRIGger:A:VIDeo:HDtv:FORMat 468
- TRIGger:A:VIDeo:HOLDoff:FIELD 469
- TRIGger:A:VIDeo:LINE 470
- TRIGger:A:VIDeo:POLarity 470
- TRIGger:A:VIDeo:SOUrce 471
- TRIGger:A:VIDeo:STANdard 471
- TRIGger:A:VIDeo{:SYNC 472
- TRIGger:B 473
- TRIGger:B:BY 473
- TRIGger:B:EDGE? (Query Only) 474
- TRIGger:B:EDGE:COUPling 474
- TRIGger:B:EDGE:SLOpe 475
- TRIGger:B:EDGE:SOUrce 475
- TRIGger:B:EVENTS:COUNt 476
- TRIGger:B:LEVel 477
- TRIGger:B:LEVel:CH<x> 477
- TRIGger:B:LEVel:D<x> 478
- TRIGger:B:STATE 479
- TRIGger:B:TIMe 480
- TRIGger:B:TYPe 480
- TRIGger:EXTernal:PRObe 481
- TRIGger:EXTe 482
- TRIGger:STATE? (Query Only) 482
- *TST? (Query Only) 483
- UNLock (No Query Form) 483
- USBDevice:CONFigure 483
- USBTMC? (Query Only) 484
- USBTMC:PRODU 485
- *WAI (No Query Form) 487
- WAVFrm? (Query Only) 487
- WFMInpre? (Query Only) 488
- WFMInpre:BIT_Nr 488
- WFMInpre:BN_Fmt 489
- WFMInpre:BYT_Nr 489
- WFMInpre:BYT_Or 490
- WFMInpre:ENCdg 490
- WFMInpre:NR_Pt 491
- WFMInpre:PT_Fmt 491
- WFMInpre:PT_Off 492
- WFMInpre:XINcr 493
- WFMInpre:XUNit 493
- WFMInpre:XZEro 494
- WFMInpre:YMUlt 494
- WFMInpre:YOFf 495
- WFMInpre:YUNit 496
- WFMInpre:YZEro 496
- WFMOutpre? (Query Only) 497
- WFMOutpre:BIT_Nr 498
- WFMOutpre:BN_Fmt 498
- WFMOutpre:BYT_Nr 499
- WFMOutpre:BYT_Or 499
- WFMOutpre:ENCdg 500
- WFMOutpre:NR_Pt? (Query Only) 501
- WFMOutpre:WF 503
- Id? (Query Only) 503
- WFMOutpre:X 504
- INcr? (Query Only) 504
- WFMOutpre:XUNit? (Query Only) 504
- WFMOutpre:XZEro? (Query Only) 504
- WFMOutpre:YMUlt? (Query Only) 505
- WFMOutpre:YOFf? (Query Only) 505
- WFMOutpre:YUNit? (Query Only) 506
- WFMOutpre:YZEro? (Query Only) 506
- ZOOm? (Query Only) 507
- ZOOm:MODe 507
- ZOOm:ZOOM<x>:POSition 508
- ZOOm:ZOOM<x>:SCAle 509
- ZOOm:ZOOM<x>:STATE 509
- Status and Events 511
- Enable Registers 513
- *PSC Command 514
- Output Queue 514
- Event Handling Sequence 515
- Synchronizat 517
- Using the *WAI Command 518
- Using the BUSY Query 519
- Using the *OPC Command 520
- Usingthe*OPC?Query 521
- Messages 522
- No Event 522
- Command Error 522
- Execution Error 523
- Device Error 526
- System Eve nt 526
- Execution Warning 526
- Internal Warning 527
- Appendix A: Character Set 529
- Appendix B: Reserved Words 531
- Appendix C: Factory Defaults 537
Produits connexes et manuels pour Mesure, test et contrôle Tektronix DPO4000
(102 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels